Kenwood TM-V71A Operation Manual - Page 27

Transmitting

Get Kenwood TM-V71A PDF manuals and user guides View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

■ Call Channel Mode Call Channel mode allows you to quickly select a preset channel to allow immediate calls on that frequency. The Call channel can be conveniently used as an emergency channel within your group. 1 Select your desired band (A or B). • The Call channel has a dedicated frequency for both bands A and B. The default frequency for band A is 144 MHz. The default frequency for band B is 430/440 MHz. 2 Press [CALL] to enter Call Channel mode. • "C" appears on the display. 3 Press [CALL] again to return to your previous operating frequency. TRANSMITTING 1 Select your desired band and frequency/channel. 2 Press and hold the microphone [PTT] switch and speak into the microphone to transmit. • The icon and the RF power meter appear on the display for the selected transmit band. The RF power meter shows the relative transmit output power. • The / / icon appears on the display, depending on what output power you have selected {page 70}. • Speak into the microphone in your normal voice, while keeping the microphone approximately 5 cm from your mouth. Speaking too close to the microphone or too loudly may increase distortion and reduce intelligibility of your signal at the receiving station. 3 When you finish speaking, release the [PTT] switch. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
19
■
Call Channel Mode
Call Channel mode allows you to quickly select a preset channel to allow
immediate calls on that frequency.
The Call channel can be conveniently used
as an emergency channel within your group.
1
Select your desired band (A or B).
•
The Call channel has a dedicated frequency for both bands A and B.
The
default frequency for band A is 144 MHz.
The default frequency for band B is
430/440 MHz.
2
Press
[CALL]
to enter Call Channel mode.
•
“C” appears on the display.
3
Press
[CALL]
again to return to your previous operating frequency.
TRANSMITTING
1
Select your desired band and frequency/channel.
2
Press and hold the microphone
[PTT]
switch and speak into the microphone to
transmit.
• The
icon and the RF power meter appear on the display for the selected
transmit band.
The RF power meter shows the relative transmit output power.
• The
/
/
icon appears on the display, depending on what output power you have
selected {page 70}.
•
Speak into the microphone in your normal voice, while keeping the microphone
approximately 5 cm from your mouth.
Speaking too close to the microphone or too
loudly may increase distortion and reduce intelligibility of your signal at the receiving
station.
3
When you finish speaking, release the
[PTT]
switch.