Kenwood TM-V71A Operation Manual - Page 65
Transmitting Stored DTMF Codes, Selecting a Transmit Speed
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
■ Transmitting Stored DTMF Codes 1 Press and hold the microphone [PTT]. 2 While transmitting, press the Tuning control. • The last called DTMF Memory channel name and number appear on the display. If no name has been saved for the channel, the DTMF code appears. 3 While still transmitting, rotate the Tuning control to select your desired DTMF Memory channel, then press the Tuning control to set the channel. • Additionally, you can press a DTMF key corresponding to your desired channel ([0] ~ [9]) to select the channel and begin transmission. • The stored DTMF code scrolls across the display and is transmitted. • The code will be transmitted even if you release [PTT] before the entire code has scrolled across the display. • If no DTMF code is stored in the selected channel, the frequency display is restored. ■ Selecting a Transmit Speed Some repeaters may not respond correctly if a DTMF code is transmitted at fast speed. If this happens, change the DTMF code transmission speed from FAST (default) to SLOW. 1 Enter Menu mode and access Menu 302 (DT.SPD) {page 20}. 2 Set the speed to FAST or SLOW. 57
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/65.png)