Kenwood TM-V71A Operation Manual - Page 37
Automatic Repeater Offset K and E Types Only
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
■ Automatic Repeater Offset (K and E Types Only) This function automatically selects an offset direction and activates the Tone function, according to the frequency that you have selected. To obtain an upto-date band plan for repeater offset direction, contact your national Amateur Radio association. 1 Enter Menu mode and access Menu 401 (ARO) {page 20}. 2 Set the ARO to ON. 3 Press [BAND SEL A] to select the A band. 4 Press [VFO] to select VFO mode. 5 Rotate the Tuning control to select your desired frequency. 6 Press [PTT] to start a call. • You will be transmitting on an offset frequency value determined from your offset setting value {page 27} and an offset direction depending on your selected frequency. Refer to the settings below for offset directions: K Type: Under 145.100 MHz: No offset (Simplex operation) 145.100 ~ 145.499 MHz: Minus (-) offset 145.500 ~ 145.999 MHz: No offset (Simplex operation) 146.000 ~ 146.399 MHz: Plus (+) offset 146.400 ~ 146.599 MHz: No offset (Simplex operation) 146.600 ~ 146.999 MHz: Minus (-) offset 147.000 ~ 147.399 MHz: Plus (+) offset 147.400 ~ 147.599 MHz: No offset (Simplex operation) 147.600 ~ 147.999 MHz: Minus (-) offset 148.000 MHz and higher: No offset (Simplex operation) E Type: Under 145.000 MHz: No offset (Simplex operation) 145.600 ~ 145.799 MHz: Minus (-) offset 145.800 MHz and higher: No offset (Simplex operation) 29