Kenwood TM-V71A Operation Manual - Page 60
Digital Coded Squelch Dcs
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
DIGITAL CODED SQUELCH (DCS) Digital Code Squelch (DCS) is another application which allows you to ignore (not hear) unwanted calls. It functions the same way as CTCSS. The only differences are the encode/ decode method and the number of selectable codes. For DCS, you can select from 104 different codes. USING DCS 1 Select your desired band. 2 Press [TONE] 3 times to activate the DCS function. • The icon appears on the display when the DCS function is ON. • Each press of [TONE] changes the selection as follows: Tone (T) -> CTCSS (CT) -> DCS (DCS) -> Off (no display). 3 Press [F], [TONE]. • The current DCS code appears on the display and blinks. 4 Rotate the Tuning control to select your desired DCS code. • Refer to the table below for the available codes. • To exit the DCS code selection, press [F] (ESC). 5 Press any key other than the Tuning control and [F] (ESC) to complete the setting. 6 When you are called: The transceiver squelch opens only when the selected DCS code is received. When you make a call: Press and hold [PTT], then speak into the microphone. • To cancel DCS, press [TONE] until DCS no longer appears on the display. 52
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/60.png)