Kenwood TM-V71A Operation Manual - Page 49
Auto Pm Channel Store, Pm Channel Reset
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
AUTO PM CHANNEL STORE After you recall a PM channel, this function automatically overwrites the current PM channel with the present operating environment when: • You recall another PM channel. • You press [PM]. • You switch the transceiver power OFF. Follow the steps below to activate the Auto PM storage function. 1 Enter Menu mode and access Menu 521 (AUTO.PM) {page 20}. 2 Set AUTO.PM to ON. Note: If you do not recall a PM channel (1 - 5), Menu No. 521 will not appear on the display. PM CHANNEL RESET To reset the PM channels to their default settings: 1 Turn the transceiver power OFF. 2 Press [F] + Power ON. 3 Release [F]. 4 Rotate the Tuning control and select PM. 5 Press the Tuning control. • A confirmation message appears on the display. 6 Press the Tuning control again to reset the PM channels. • Press [TONE] (BACK) to return to the previous display. • To exit without resetting the PM channels, press [F] (ESC). 41
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/49.png)