Kenwood TM-V71A Operation Manual - Page 90
Repeater Hold, Repeater Id
![]() |
View all Kenwood TM-V71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
REPEATER HOLD If necessary, you can set the transceiver to remain in the transmit mode for 500 ms after a signal drops. 1 Enter Menu mode and access Menu 404 (RPT.HLD) {page 20}. 2 Set the Repeater Hold function to ON or OFF. REPEATER ID If necessary, you can set the transceiver to transmit your call sign every 10 minutes. 1 Enter Menu mode and access Menu 406 (ID.TX) {page 20}. 2 Set the ID Trasmit function to OFF, MORSE, or VOICE. • To use VOICE transmission, you must have the VGS-1 option installed. When using the VGS-1 option, the ID Transmit function will use VGS channel 3 as the call sign {page 78}. • When selecting MORSE, the call sign stored in Menu 405 {see below} will be transmitted at 20 wpm (words per minute). ■ Entering your Repeater ID 1 Enter Menu mode and access Menu 405 (RPT.ID) {page 20}. 2 Enter your call sign {page 24}. 82
![](/manual_guide/products/kenwood-tmv71a-operation-manual-c7a4adb/90.png)