Konica Minolta bizhub C360 bizhub C220/C280/C360 Copy Operations User Guide - Page 140

7.1 [System Settings] 7 7.1 [System Settings] Configure the basic functions of this machine. 7.1.1 [Power Save Settings] Configure the settings for the power-saving mode. % Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Power Save Set- tings]. Settings [Low Power Mode Settings] [Sleep Mode Settings] [Power Save Key] [Enter Power Save Mode] Enter a time period before switching to the lower power mode when this machine is not being operated. Enter a time period before switching to the sleep mode when this machine is not being operated. Configure the type of the power save function to be started when you press the Power Save key. [Low Power] Provides power-saving effect higher than normal. [Sleep] Provides power-saving effect higher than the low power mode. However, the machine must be warm-up when restarting operations, therefore taking more preparation time than the low power mode. Configure settings for switching to the power save mode after printing documents from computers or receiving faxes. [Normal] Enters the power save mode when the time specified in Low Power Mode Settings has elapsed. [Immediately] Enters the power save mode in a short time. Factory default [Low Power Mode Settings] [Sleep Mode Settings] [Power Save Key] [Enter Power Save Mode] 15 min. 20 min. [Low Power] [Immediately] bizhub C360/C280/C220 7-3