Konica Minolta bizhub C360 bizhub C220/C280/C360 Copy Operations User Guide - Page 149
Leading Edge Adjustment], Centering]
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
7.1 [System Settings] 7 [Leading Edge Adjustment] Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed direction). 1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Printer Adjustment] ö [Leading Edge Adjustment]. % To adjust the starting print position at the leading edge of the second side for 2-sided printing (with respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)]. 2 Select a paper type to be adjusted. 3 Load the paper into the Bypass Tray. 4 Press the Start key. A test pattern is printed. 5 Check that the distance from the starting print position of the test pattern to the edge of the paper (a) is 4.2 mm. % Press [+] or [-] to adjust the width. Press the Start key to print a test pattern. a 6 Press [OK]. a:4.2mm [Centering] Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction). 0 Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the Bypass Tray. 1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Printer Adjustment] ö [Centering]. % To adjust the starting print position at the left edge of the second side for 2-sided printing (with respect to the paper feed direction), press [Centering (Duplex 2nd Side)]. 2 Select a paper tray to be adjusted. 3 Press the Start key. A test pattern is printed. 4 Check that the distance from the starting print position of the test pattern to the left edge of the paper (b) is 3.0 mm (±0.5 mm). b % Press [+] or [-] to adjust the width. Press the Start key to print a test pattern. 5 Press [OK]. b:3.0mm±0.5mm bizhub C360/C280/C220 7-12