Konica Minolta bizhub C360 bizhub C220/C280/C360 Copy Operations User Guide - Page 155
Reset Settings]
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
7.1 [System Settings] 7 Factory default [Job Settings List] • [1-Sided] • Tray 1 7.1.9 [Reset Settings] Configure auto reset settings. 0 All settings performed in the following tabs during operation using the copy function are automatically reset to the initial settings after the specified time has elapsed. [Basic], [Original Setting], [Quality/Density], [Application] 0 Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates when this machine is not used for one minute during user authentication/account track operations. % Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Reset Settings]. Settings [System Auto Reset] [Auto Reset] [Job Reset] bizhub C360/C280/C220 [Priority Mode] [System Auto Reset Time] Configure a mode to be displayed in the system auto reset mode. Configure whether to perform system auto reset. Specify a time until the initial screen appears if this machine is not operated. The specified time is not canceled. d Reference If user authentication or enhanced security mode is enabled, the administrator settings mode or user authentication mode is logged off according to the setting for System Auto Reset Time. In the enlarge display mode, the system auto reset mode is disabled. Configure whether to perform auto reset in the selected mode. Specify a time until the basic settings screen appears and the settings are reset to the initial values if this machine is not operated. [When Account is changed] Configure whether to reset the settings when you log off if the user authentication or account track settings have been configured. [When original is set on ADF] Configure whether to reset the settings when an original is loaded in the ADF. [Next Job] Configure whether to reset the following settings when the next job is selected. • [Staple Setting] • [Original Set/Bind Direction] • [Reset Data After Job] The destination of data is always reset. 7-18