Konica Minolta bizhub C360 bizhub C220/C280/C360 Copy Operations User Guide - Page 195
Loading paper into the Bypass Tray
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
8.1 Paper 8 5 Close the LCT tray. d Reference To configure paper settings: Press [Basic] ö [Paper]. Loading paper into the Bypass Tray 1 Open the Bypass Tray. % To load large-sized paper, pull out the tray extension. NOTICE Be careful not to touch the surface of the Paper Take-Up Roller with your hand. 2 With the side to be printed on facing down, insert the paper as far as possible into the feed slot. % The image will be printed on the surface of the paper facing down when the paper is loaded into the bypass tray. % Do not load so many sheets of paper that the top of the stack is higher than the mark. % If paper is curled, flatten it before loading it. % Push the Lateral Guide firmly up against the edges of the paper. % Load letterhead paper so that the side to be printed on faces up. % When loading postcards: Load them in the w orientation, as shown in the illustration. To use postcards other than the 4 e 6 (A6) size, check the size of postcards to be used, and then specify the size on the Custom Size screen before using them. % When loading Transparency: Load them in the v orientation, as shown in the illustration. bizhub C360/C280/C220 8-5