Konica Minolta bizhub C360 bizhub C220/C280/C360 Copy Operations User Guide - Page 147
System Settings], Start, Slit Scan Glass, Settings - scanning issues
View all Konica Minolta bizhub C360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
7.1 [System Settings] 7 Settings [Density Adjustment] [Image Stabilization] [Paper Separation Adjustment] [Color Registration Adjust] [Gradation Adjustment] [Scanner Area] [ADF Adjustment] [Line Detection] Correct the toner amount to be used by color depending on the paper type. • To correct the toner amount to be used in the black print mode, press [Black Image Density]. [Image Stabilization Only] Press the Start key to stabilize images. Pressing the [Image Stabilization Only] button executes normal image stabilization. If a good result was not achieved after the [Image Stabilization Only] button was pressed, execute [Initialize + Image Stabilization]. [Image Stabilization Setting] Specify the type and opportunity of image stabilization. If [Standard] is selected, normal stabilization is performed during warm-up processing when a change in the absolute humidity has been detected during warm-up processing. If [Color Priority] is selected, color stabilization is performed when the power has been turned on. Selecting [Black & White Priority] executes monochrome stabilization during warm-up when absolute humidity change is detected during the warmup, and then stabilizes color before performing color print. Adjust the paper position where the two sides are separated for 2-sided print. Correct color shifts if they are detected in the print result. For details, refer to page 7-15. Adjust irregular gradation levels of print images. For details, refer to page 7-16. [Image Stabilization Only] Stabilize the image by pressing the Start key before performing gradation adjustment. [Print] Adjust the gradation when the color gradation has been changed in a print image. This function performs adjustment, emphasizing the gradation expression of an image and the reproducibility of texts or lines. [Copy] Adjust the gradation when the color gradation has been changed in a print image. This function performs adjustment to save as many images as possible in memory. Adjust the scan range of the scanner. For details on displaying this item, contact your service representative. Make adjustments for scanning images in the ADF. For details on displaying this item, contact your service representative. [Prior Detection Setting] Configure whether to issue an alert when the Slit Scan Glass is dirty. • Select an alert display format and contamination detection level. [Feed Cleaning Settings] Configure whether to remove a dirt on the Slit Scan Glass each time one sheet of paper passes through the ADF when scanning an original using the ADF. bizhub C360/C280/C220 7-10