Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 188

Symptom Media is misfeeding. Cause Solution The media is not cor- Remove the misfed media and reposirectly positioned in tion the media properly in the tray. the tray. The number of sheets Remove the excess media and reload in the tray exceeds the correct number of sheets in the the maximum tray. allowed. The media guides are Adjust the media guides in the tray to not correctly adjusted match the size of the media. to the media size. Warped or wrinkled Remove the media, smooth it out, and media is loaded in the reload it. If it still misfeeds, do not use tray. that media. The media is moist Remove the moist media and replace it from humidity. with new, dry media. Custom-sized media, Special media must be loaded in envelopes, labels, Tray 1 and 2. postcards, thick stock, or transparencies are loaded in Tray 3, 4 or 5. The recommended Load the transparencies or label transparency or label sheets according to the manufacturer's sheet is facing the instructions. wrong way in Tray 1. Envelopes are facing Load the envelopes in Tray 1 so the the wrong way in flaps are facing up. Tray 1. If the flaps are on the long edge, load the envelopes with the flaps toward the right of the printer. 174 Solving Problems with Media Misfeeds