Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 197
media. See Media Specifications
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Symptom Cause Solution The print or One or more of the Remove the toner cartridges and color density toner cartridges may check them for damage. If one is damis uneven. be defective or low. aged, replace it. The printer is not level. Place the printer on a flat, hard, level surface. Irregular print or mottled image appears. The media is moist from humidity. Adjust the humidity in the media storage area. Remove the moist media and replace it with new, dry media. Unsupported media (wrong size, thickness, type, etc.) is being used. Use KONICA MINOLTA-approved media. See "Media Specifications" on page 86. One or more of the Remove the imaging units and check for imaging units may be damage. If it is damaged, replace it. defective. There is The media is moist insufficient from humidity. fusing or the Unsupported media image (wrong size, thick- comes off ness, type, etc.) is when being used. rubbed. Media type is set incorrectly. Remove the moist media and replace it with new, dry media. Use KONICA MINOLTA-approved media. See "Media Specifications" on page 86. When printing envelopes, labels, postcards, thick stock, or transparencies, specify the appropriate media type in the printer driver. The levers on the fuser unit are set to the position for envelopes. Before printing on media other than envelopes, be sure to return the levers on the fuser unit to the setting for plain paper. Solving Problems with Printing Quality 183