Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 191
Default Menu, Energy Saver, Incor, Rect Toner X, Install A Correct Konica Minolta
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Symptom Cause Solution Images cannot be printed from the digital camera. The digital camera Set the digital camera transfer mode to transfer mode is not PictBridge. set to PictBridge. " Printer only supports a PictBridge compliant digital camera. Printing takes too much time. The printer is set to a It takes more time to print on special slow printing mode media. When using regular paper, (for example, thick make sure that the media type is set stock or transpar- properly in the driver. ency). The printer is set to Energy Saver mode. It takes time for printing to start in Energy Saver mode. If you do not want to use this mode, disable it. (SYS DEFAULT MENU/ENERGY SAVER menu) The job is very com- Wait. No action needed. plex. The printer memory is Add more memory. insufficient. A toner cartridge for a Install a correct KONICA MINOLTA different region or an toner cartridge approved for your speunapproved genuine cific printer. toner cartridge is installed (INCORRECT TONER X is displayed in the message window). Blank pages One or more of the come out toner cartridges are during print- defective or empty. ing. The wrong media is being used. Check the toner cartridges. The image will not print if one or more cartridges are empty. Check that the media type set in the driver matches the media loaded in the printer. Solving Other Problems 177