Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 219
Attach the left-side cover and tighten the screws., Reconnect all interface cables.
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
3 Plug the cable on the hard disk into the connector on the con- troller board. 4 Insert the three mounting pins on the hard disk into the holes in the controller board to mount the hard disk onto the controller board. 5 Attach the left-side cover and tighten the screws. 6 Reconnect all interface cables. 7 Reconnect the power cord, and turn on the printer. 8 Declare the hard disk in the Windows printer driver (Properties/Configure tab). Hard Disk Kit 205
Hard Disk Kit
205
3
Plug the cable on the hard disk
into the connector on the con-
troller board.
4
Insert the three mounting pins
on the hard disk into the holes in
the controller board to mount the
hard disk onto the controller
board.
5
Attach the left-side cover and tighten the screws.
6
Reconnect all interface cables.
7
Reconnect the power cord, and
turn on the printer.
8
Declare the hard disk in the Windows printer driver (Properties/Configure
tab).