Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 209
Paper Jam, Duplex1, Fuser/exit, Second Trans, Tray1, Vertical Trans, I-unit End, Replace, I-unit Life
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
This message... PAPER JAM DUPLEX1 PAPER JAM DUPLEX2 PAPER JAM FUSER/EXIT PAPER JAM SECOND TRANS PAPER JAM TRAY1 PAPER JAM TRAYX PAPER JAM VERTICAL TRANS I-UNIT END REPLACE X I-UNIT LIFE REPLACE X means... do this... Media has misfed in the duplex option. Media has misfed in the duplex option. Media has misfed leaving the fuser area. Press the Down key to display the help screen. Follow the instructions in the help screen to remove the misfed media. Media has misfed in the transfer roller area. This type of misfeed means that the media did not make it to the media exit area. Media has misfed in Tray 1. Media has misfed while being pulled from the specified tray (Tray 2, 3, 4 or 5). Media has misfed in the vertical transfer area. The X imaging unit Replace the imaging has completely unit. reached the end of its life. The X imaging unit has reached the end of its life. This message appears when the SYS DEFAULT MENU/IMAGING UNIT LIFE menu is set to STOP. Replace the imaging unit. Press in the control panel and select CONTINUE from the help screen to print 20 pages or temporarily continue printing until the current job is completed. However, if printing is continued, the message "I-UNIT END" appears and printing stops. Status, Error, and Service Messages 195