Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 25

Selecting Driver Options/Defaults (for Windows) Before you start working with your printer, you are advised to verify/change the default driver settings. Also, in case you have options installed, you should "declare" the options in the driver. Windows Vista/Server 2003/XP/2000 (PCL6, PS) 1 Choose the driver's properties as follows: - (Windows Vista) From the Start menu, choose Control Panel, then Hardware and Sound, and then Printers to display the Printers directory. Right-click the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA mc7450 PS printer icon and choose Properties. - (Windows Server 2003/XP) From the Start menu, choose Printers and Faxes to display the Printers and Faxes directory. Right-click the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA mc7450 PS printer icon and choose Properties. - (Windows 2000) From the Start menu, choose Settings and then Printers to display the Printers directory. Right-click the KONICA MINOLTA mc7450 PCL6 or KONICA MINOLTA mc7450 PS printer icon and choose Properties. 2 If you have installed options, proceed with the next step. Otherwise, skip to step 9. 3 Select the Configure tab. 4 Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise, continue with step 8. 5 Click the Refresh to automatically configure installed options. " The Refresh is available only if bi-directional communication is available with the printer; otherwise it is grayed out. 6 From the Device Options list, select an option, one at a time, and then select Enable or Disable from the Settings menu. " If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or 1024 MB, according to the installed memory. The factory default setting is 256 MB. Selecting Driver Options/Defaults (for Windows) 11