Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 77
Seconds, 300 Seconds, Ether, Tcp/ip Enable, Address, Dhcp/bootp, Subnet, Default, Gateway, Bootp
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
" All factory default values are shown in bold. JOB Settings 5 seconds-15 seconds-300 seconds TIME- Specify the timeout interval for a print job being received. OUT ETHER- TCP/IP ENABLE Settings YES/NO NET If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. IP Setting 000.000.000.000 ADDRESS Set the IP address for this printer on the network. Use the Up, Down, Left, and Right keys to specify the value. If the IP address is manually specified, DHCP/BOOTP is automatically set to OFF. SUBNET Setting 255.255.000.000 MASK Specify the subnet mask for the network. Use the Up, Down, Left, and Right keys to specify the value. DEFAULT Setting 000.000.000.000 GATEWAY Specify the IP address of the router if one is on the network. Use the Up, Down, Left, and Right keys to specify the value. DHCP/ BOOTP Settings ON/OFF Select whether or not the IP address is automatically acquired. If ON is selected, the IP address is automatically acquired. If OFF is selected, the IP address is not automatically acquired. Configuration Menu Overview 63