Konica Minolta magicolor 7450 II grafx magicolor 7450 II User Guide - Page 85
Tinue, Auto Continue, 1 Hour/4 Hours/1 Day, Disable, Energy, Saver, Light Sleep/off, Deep Sleep
View all Konica Minolta magicolor 7450 II grafx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
AUTO CONTINUE Settings ON/OFF Select whether or not printing continues if the size or type of media in the selected tray is different from the size or type of media for the print job. If AUTO CONTINUE is set to ON, printing automatically continues after about 10 seconds under the following conditions. At this time, printing will be performed even if the media size is different. No media: PAPER EMPTY (Page 194)/TRAY EMPTY (Page 196) Different media size/type: PAPER ERROR (Page 194)/TRAY x PAPER ERR (Page 196) HOLD JOB TIME OUT Settings DISABLE/1 hour/4 hours/1 day/ 1 week Specify the length of time until print jobs saved on the hard disk are deleted. If DISABLE is selected, print jobs are not deleted at a specific time. ENERGY Settings DEEP SLEEP/LIGHT SLEEP/OFF SAVER If DEEP SLEEP was selected and the printer entered Energy Saver mode, no operation is available other than that to exit Energy Saver mode. However, if the printer receives print data or a control panel key is pressed, the printer will automatically exit Energy Saver mode and begin operating. If LIGHT SLEEP was selected, the configuration menu can be used even if the printer has entered Energy Saver mode. In addition, if the printer receives print data, the printer begins operating immediately. If OFF is selected, the machine will not enter Energy Saver mode. ENERGY Settings 15 minutes/30 minutes/1 hour/ SAVER 3 hours TIME Specify the length of time until the machine enters Energy Saver mode. This menu item appears only when ENERGY SAVER is set to ON. Configuration Menu Overview 71