Kyocera ECOSYS M5521cdn ECOSYS M5521cdn/M5521cdw FAX Operation Guide - Page 24
FAX Dialing Mode, ECM TX, TX Start Speed, Display the screen., Set the FAX Dialing Mode.
View all Kyocera ECOSYS M5521cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Before Using the Fax Machine > Local FAX Information Entry FAX Dialing Mode Select the dialing mode according to the line type. NOTE This setting does not appear in some regions. 1 Display the screen. [System Menu/Counter] key key > [FAX] > [OK] key key > [Transmission] > [OK] key key > [FAX Dialing Mode] > [OK] key 2 Set the FAX Dialing Mode. [Tone(DTMF)] or [Pulse(10pps)] > [OK] key ECM TX Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. NOTE When there is a large amount of noise on the line, communication may take slightly longer than when [Off] is selected. 1 Display the screen. [System Menu/Counter] key key > [FAX] > [OK] key key > [Transmission] > [OK] key key > [ECM TX] > [OK] key 2 Configure the settings. [On] or [Off] > [OK] key TX Start Speed Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case, set a lower TX Start Speed. NOTE Normally this should be used with the default setting. 1 Display the screen. [System Menu/Counter] key key > [FAX] > [OK] key key > [Transmission] > [OK] key key > [TX Start Speed] > [OK] key 2 Configure the settings. [9600bps], [14400bps] or [33600bps] > [OK] key 2-10