Kyocera ECOSYS M5521cdn ECOSYS M5521cdn/M5521cdw FAX Operation Guide - Page 40
Select transmission settings., Select the [OK] key., Detail, Change, Check New Dest.
View all Kyocera ECOSYS M5521cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Sending Faxes > Methods For Entering the Destination 3 Select transmission settings. Sub address communication, encrypted transmission, transmission start speed and ECM can be set. 1 Select [Detail]. 2 Select the item to change the settings for and then select [Edit] or [Change]. Key Sub Address Encrypted Transmission TX Start Speed ECM 3 Select the [OK] key. Description Set this to transmit using a Sub Address. Sub Address Transmission (page 5-16) This is set when using encrypted transmission to send the data. Encryption (page 5-23) This is set to change the transmission start speed. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. NOTE Normally this should be used with the default setting. ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. 4 Select the [OK] key. Entry of the destination finishes. NOTE When [On] is selected in [Check New Dest.], a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and select [OK]. Machine's Operation Guide You can enter the next fax number. Broadcast Transmission (page 3-11) In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission to send as one job. Machine's Operation Guide 3-8