Kyocera ECOSYS M5521cdn ECOSYS M5521cdn/M5521cdw FAX Operation Guide - Page 27
Enter the fax number., Select transmission settings., FAX Number, Detail, Change, Address Number
View all Kyocera ECOSYS M5521cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Before Using the Fax Machine > Registering Destinations in the Address Book 5 Enter the fax number. 1 key > [FAX Number] > [Edit] 2 Enter the fax number. NOTE Up to 32 characters can be entered. Use the numeric keys to enter a number. Selecting the [Address Recall/Pause] key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. 6 Select transmission settings. Sub address communication, encrypted transmission, transmission start speed and ECM can be set. 1 Select [Detail]. 2 Select the item to change the settings for and then select [Edit] or [Change]. Item Sub Address Encrypted TX TX Start Speed ECM Description Set this to transmit using a Sub Address. Sub Address Transmission (page 5-16) This is set when using encrypted transmission to send the data. Using the Encrypted Transmission (page 5-25) This is set to change the transmission start speed. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. NOTE Normally the default setting should be used. ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. 3 [OK] key > [OK] key 7 Enter the address number. 1 key > [Address Number] > [Edit] 2 Enter the address number. NOTE You can set any value between 1 and 120. Select the [▲] or [▼] key or the numeric keys to enter a number. Address Number is an ID for a destination. You can select any available number for groups. If you specify an address number that is already in use, an error message appears when you select the [OK] key and the number cannot be registered. 3 Select the [OK] key. 2-13