Lantronix XPress-DR XPress-DR / XPress-DR-IAP - User Guide - Page 27
LEDs, Table 5 - DSTni-XPress DR, LED Functions, Table 6 - LED Error Indications
View all Lantronix XPress-DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Introduction 1.10 LEDs The device contains the following LEDs: • Two Green (R for ready, L for link) • Three Yellow (A for active, serial transmit, and serial receive) • One Red (F for fault) READY FAULT ACTIVE LINK RESET F R A L RS232 RECEIVE TRANSMIT RS485 10/100BASE-T SERIAL Table 5 - DSTni-XPress DR LED Functions LED R (Green) L (Green) A (Yellow) TXD (Yellow) RXD (Yellow) F (Red) Meaning Ready (Solid=ready, blinking = error message, port busy) Link (socket connection made) = Solid Activity (network) = Random Flashing Transmitting serially = Flashes during transmit Receiving serially = Flashes during receive Fault in XPress DR communication (read error) or XPress DR is in Configuration Mode Simultaneously lit F (Red) and R (Green) LEDs mean something is wrong. If the F (Red) LED is lit or blinking, count the number of times the R (Green) LED blinks between its pauses. Six possible blink patterns, detailed in the following table, indicate which fault condition exists. Table 6 - LED Error Indications LED Steady F (Red) and Blinking R (Green) Blinking F (Red) and blinking R (Green) Error 1 blink = EPROM checksum error 2 blinks = RAM error 3 blinks = Token Ring error 4 blinks = EEPROM checksum error 1 blink = Faulty network connection 2 blinks = No DHCP response 4 blinks = Setup Mode DSTni-XPress DR User Guide 1-13