Lenovo S200 Hardware Maintenance Manual - Page 104
Notes
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
12. Lift the heat sink and fan assembly off the failing system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. Note: You might have to gently twist the heat sink to free it from the microprocessor. 13. Remove the retention module from the rear of the failing system board and install it in the same position on the new system board. 14. To remove the microprocessor 2 from the system board, lift the small handle 1. 15. Lift the microprocessor straight up and out of the socket. Notes: a. Your microprocessor and socket might look different than the one illustrated. b. Note the orientation of the microprocessor in the socket. Look for the small triangle on one corner of the microprocessor. This is important when reinstalling the microprocessor on the new system board. 98 Hardware Maintenance Manual