Home » Lenovo Manuals » Desktops » Lenovo S200 » Manual Viewer

Lenovo S200 Hardware Maintenance Manual - Page 54

results, Quick, erase, drive

Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Test results (N/A, PASSED, FAILED, ABORTED) are displayed in the field beside the test description and in the test log. See "Viewing the test log" on page 49. To select one or more tests, use the following procedure. 1. Open the corresponding test category. 2. Using the cursor movement keys, highlight the desired test. 3. Press the space bar. A selected test is marked by >>. Pressing the space bar again de-selects a test and removes the >>. 4. Repeat steps 2 and 3 above to select all desired tests. Test results Diagnostics test results produce the following error code format: Function Code Failure Type DeviceID Date ChkDigits Text v Function Code: Represents the feature or function within the PC. v Failure Type: Represents the type of error encountered. v DeviceID: Contains the component's unit-ID which corresponds to either a fixed disk drive, removable media drive, serial or parallel port, processor, specific RIMM, or a device on the PCI bus. v Date: Contains the date when the diagnostic test was run. The date is retrieved from CMOS and displayed using the YYYYMMDD format. v ChkDigits: Contains a 2-digit check-digit value to ensure the following: - Diagnostics were run on the specified date. - Diagnostics were run on the specified computer. - The diagnostic error code is recorded correctly. v Text: Description of the error. Note: See "Diagnostic error codes" on page 56 for error code listings. Quick and Full erase - hard drive The diagnostics program offers two hard drive format utilities: v Quick Erase Hard Drive v Full Erase Hard Drive The Quick Erase Hard Drive provides a DOS utility that performs the following: v Destroys the Master Boot Record (MBR) on the hard drive. v Destroys all copies of the FAT Table on all partitions (both the master and backup). v Destroys the partition table. v Provides messages that warn the user that this is a non-recoverable process. 48 Hardware Maintenance Manual

Section	Page
Contents	5
Chapter 1. About this manual	7
Important Safety Information	7
Important information about replacing RoHS compliant FRUs	8
Chapter 2. Safety information	9
General safety	9
Electrical safety	9
Voltage-selection switch	11
Safety inspection guide	11
Handling electrostatic discharge-sensitive devices	12
Grounding requirements	13
Safety notices (multi-lingual translations)	13
Chapter 3. General information	45
The Lenovo Care program	45
Additional information resources	45
Specifications	46
Types 7812, 7813, 7814, 7815, 9680, 9681, 9682, 9683, 9684, and 9685	46
Types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, and 9691	47
Chapter 4. General Checkout	49
Problem determination tips	49
Chapter 5. Diagnostics	51
PC-Doctor for Windows	51
PC-Doctor for Windows PE	51
Running diagnostics from the Rescue and Recovery workspace	51
PC-Doctor for DOS	52
Creating a diagnostic CD image	52
Creating diagnostic diskettes	52
Running diagnostics from the CD or diskettes	53
Navigating through the diagnostics programs	53
Running tests	53
Test results	54
Quick and Full erase - hard drive	54
Viewing the test log	55
Chapter 6. Using the Setup Utility	57
Starting the Setup Utility program	57
Viewing and changing settings	57
Using passwords	57
Password considerations	57
User Password	58
Administrator Password	58
Setting, changing, and deleting a password	58
Using Security Profile by Device	58
Selecting a startup device	59
Selecting a temporary startup device	59
Selecting or changing the startup device sequence	59
Advanced settings	60
Exiting from the Setup Utility program	60
Chapter 7. Symptom-to-FRU Index	61
Hard disk drive boot error	61
Power Supply Problems	61
Diagnostic error codes	62
Beep symptoms	83
POST error codes	84
Miscellaneous error messages	86
Undetermined problems	87
Chapter 8. Replacing FRUs (Types 7812, 7813, 7814, 7815, 9680, 9681, 9682, 9683, 9684, and 9685)	89
Rear connectors	90
Removing the cover	91
Locations	92
Locating parts on the system board	93
Machine types 7812, 7813, 9680 and 9681	93
Machine types 7814, 7815, 9682 and 9683	94
Machine types 9684 and 9685	95
Accessing system board components and drives	96
Replacing a memory module	98
Replacing the CMOS battery	100
Replacing the power supply	101
Replacing the system board	103
Types 7812, 7813, 9680, and 9681	103
Types 7814, 7815, 9682, 9683, 9684, and 9685	106
Replacing the microprocessor	110
Types 7812, 7813, 9680 and 9681	110
Types 7814, 7815, 9682, 9683, 9684, and 9685	114
Replacing the hard disk drive	118
Replacing an optical drive	120
Replacing the diskette drive	121
Replacing the power switch/LED assembly	122
Replacing the front panel card	123
Replacing the system fan assembly	123
Replacing a PCI adapter	125
Completing the FRU replacement	126
Chapter 9. Replacing FRUs (Types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, and 9691)	127
Rear connectors	128
Removing the cover	129
Locations	130
Locating parts on the system board	131
Machine types 7816, 7817, 9686 and 9687	131
Machine types 7818, 7819, 9688 and 9689	132
Machine types 9690 and 9691	133
Removing and replacing the front bezel	134
Replacing the power supply	135
Replacing the system board	136
Types 7816, 7817, 9686 and 9687	136
Types 7818, 7819, 9688, 9689, 9690, and 9691	140
Replacing the microprocessor	145
Types 7816, 7817, 9686 and 9687	145
Types 7818, 7819, 9688, 9689, 9690, and 9691	148
Replacing a memory module	152
Replacing a PCI adapter	154
Replacing the hard disk drive	156
Replacing an optical drive	159
Replacing the diskette drive	160
Replacing the rear fan assembly	161
Replacing the front fan assembly	163
Replacing the front audio/USB assembly	165
Replacing the power switch/LED assembly	166
Replacing the CMOS battery	166
Completing the FRU replacement	167
Chapter 10. FRU lists	169
Machine Type 9680	169
Machine Type 9681	174
Machine Type 9682	182
Machine Type 9683	186
Machine Type 9684	192
Machine Type 9685	200
Machine Type 9686	206
Machine Type 9687	213
Machine Type 9688	220
Machine Type 9689	226
Machine Type 9690	233
Machine Type 9691	242
Chapter 11. Additional Service Information	249
Security features	249
Hardware controlled Passwords	249
Operating system password	249
Vital product data	249
BIOS levels	249
Flash update procedures	249
Updating (flashing) BIOS from a CD-ROM or diskette	250
Recovering from a POST/BIOS update failure	250
Power management	251
Automatic configuration and power interface (ACPI) BIOS	251
Automatic Power-On features	251
Appendix. Notices	253
Television output notice	254

Match case Limit results 1 per page

Test

results

(N/A,

PASSED,

FAILED,

ABORTED)

are

displayed

the

field

beside

the

test

description

and

the

test

log.

See

“Viewing

the

test

log”

page

49.

select

one

tests,

use

the

following

procedure.

Open

the

corresponding

test

category.

Using

the

cursor

movement

keys,

highlight

the

desired

test.

Press

the

space

bar.

selected

test

marked

Pressing

the

space

bar

again

de-selects

test

and

removes

the

>>.

Repeat

steps

and

above

select

all

desired

tests.

Test

results

Diagnostics

test

results

produce

the

following

error

code

format:

Function

Code

Failure

Type

DeviceID

Date

ChkDigits

Text

Function

Code:

Represents

the

feature

function

within

the

PC.

Failure

Type:

Represents

the

type

error

encountered.

DeviceID:

Contains

the

component’s

unit-ID

which

corresponds

either

fixed

disk

drive,

removable

media

drive,

serial

parallel

port,

processor,

specific

RIMM,

device

the

PCI

bus.

Date:

Contains

the

date

when

the

diagnostic

test

was

run.

The

date

retrieved

from

CMOS

and

displayed

using

the

YYYYMMDD

format.

ChkDigits:

Contains

2-digit

check-digit

value

ensure

the

following:

–

Diagnostics

were

run

the

specified

date.

–

Diagnostics

were

run

the

specified

computer.

–

The

diagnostic

error

code

recorded

correctly.

Text:

Description

the

error.

Note:

See

“Diagnostic

error

codes”

page

for

error

code

listings.

Quick

and

Full

erase

hard

drive

The

diagnostics

program

offers

two

hard

drive

format

utilities:

Quick

Erase

Hard

Drive

Full

Erase

Hard

Drive

The

Quick

Erase

Hard

Drive

provides

DOS

utility

that

performs

the

following:

Destroys

the

Master

Boot

Record

(MBR)

the

hard

drive.

Destroys

all

copies

the

FAT

Table

all

partitions

(both

the

master

and

backup).

Destroys

the

partition

table.

Provides

messages

that

warn

the

user

that

this

non-recoverable

process.

Hardware

Maintenance

Manual