Lenovo S200 Hardware Maintenance Manual - Page 147
socket
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
8. Make sure that the small handle is in the raised position. 9. Holding the microprocessor with your fingers, position the microprocessor so that the small triangle on one corner is aligned with the corresponding triangle on the microprocessor socket. 10. Lower the microprocessor straight down into the system board socket of the new system board. 11. Lower the small handle to secure the microprocessor in the socket. 12. Install the heat sink and fan assembly on the system board. 13. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 125. 14. Go to "Completing the FRU replacement" on page 161. Chapter 9. Replacing FRUs - Tower Computers 141