Lenovo S200 Hardware Maintenance Manual - Page 114
continuing
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Types 7814, 7815, 9682, 9683, 9684, and 9685 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. 1. Remove the cover. See "Removing the cover" on page 85. 2. Lift the fan duct off the heat sink fan. 3. Disconnect the heat sink and fan assembly cable from the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 87. 4. Remove the four screws 1 securing the heat sink and fan assembly to the system board. 5. Lift the heat sink and fan assembly off the system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. Note: You might have to gently twist the heat sink to free it from the microprocessor. 108 Hardware Maintenance Manual