Lenovo S200 Hardware Maintenance Manual - Page 250
Updating, flashing, CD-ROM, diskette, Recovering, POST/BIOS, update, failure
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Updating (flashing) BIOS from a CD-ROM or diskette This section describes how to update (flash) the BIOS using a diskette or CD-ROM. System program updates are available at http://www.lenovo.com/support on the World Wide Web. 1. To update (flash) the BIOS: v From a CD-ROM, make sure the computer is turned on. Insert the CD-ROM into the optical drive. The update begins. v From a diskette, make sure the computer is turned off and insert a system program update (flash diskette). Then turn the computer on. The update begins. 2. When you are prompted to select a language, press the number on your keyboard that corresponds to the language and then press Enter. 3. When prompted to change the serial number, press Y. 4. Type in the seven character serial number of your computer and then press Enter. 5. When prompted to change the machine type/model, press Y. 6. Type in the seven character machine type/model of your computer and then press Enter. 7. Follow the instructions on the screen to complete the update. Recovering from a POST/BIOS update failure Attention: If an interruption occurs during a POST/BIOS update (flash update), the computer might not restart correctly. If this occurs, perform the following procedure (also known as a Boot-block recovery). Note: If your computer has no internal diskette drive, an optional USB diskette drive must be connected to use the BIOS flash diskette. 1. Turn the computer off and insert the BIOS flash diskette in the diskette drive. 2. Turn the computer on and immediately during startup, press the Ctrl and Home keys (Ctrl + Home) at the same time. 3. The computer will automatically begin recovering the BIOS. During this time you will see a screen indicating that Flash recovery has started. After the update session completes, the computer automatically reboots. 4. Remove the BIOS flash diskette from the diskette drive. 244 Hardware Maintenance Manual