Lenovo S200 Hardware Maintenance Manual - Page 163
Replacing, front, assembly
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Replacing the front fan assembly This procedure describes how to remove and replace the front fan assembly. 1. Remove the computer cover. See "Removing the cover" on page 123. 2. Remove the front bezel. See "Removing and replacing the front bezel" on page 128. 3. Note the routing of the front fan cable to the system board. Disconnect the front fan assembly cable from the system board. See "Locating parts on the system board" on page 125. 4. The fan assembly is mounted with four rubber mounts that protrude through the front of the chassis. Remove the fan assembly by pulling the rubber mounts back through the chassis. 5. Install the new front fan assembly by aligning the rubber mounts of the front fan assembly with the holes on the chassis and push the rubber mounts through the holes. Chapter 9. Replacing FRUs - Tower Computers 157