Lenovo S200 Hardware Maintenance Manual - Page 145
procedure.
View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Replacing the microprocessor This procedure describes how to remove and replace the microprocessor. The procedure varies depending upon the machine type. Types 7816, 7817, 9686 and 9687 Important The heat sink and microprocessor might be very hot. Make sure these components are cool enough to safely handle before continuing this procedure. 1. Remove the cover. See "Removing the cover" on page 123. 2. Place the computer on its right side to help make the microprocessor more accessible. 3. Disconnect the heat sink and fan assembly cable from the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 125. 4. Rotate handle 1 to release the heat sink clamp and then disengage the clamp from the plastic retention bracket. 5. Lift the heat sink and fan assembly off the system board. Place the heat sink on its side so that the thermal grease does not come in contact with anything. Chapter 9. Replacing FRUs - Tower Computers 139