Lenovo S200 Hardware Maintenance Manual - Page 112

illustration

Get Lenovo S200 PDF manuals and user guides View all Lenovo S200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 112 highlights

10. Holding the microprocessor with your fingers, position the microprocessor so that the triangle 1 is aligned with the corresponding triangle on the socket. 11. Lower the microprocessor straight down into the socket. Note: Install the black protective cover that was removed from the new microprocessor onto the defective microprocessor after the installation is complete. 12. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 13. Install the heat sink and fan assembly on the system board. 14. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Locating parts on the system board" on page 87. 15. Position the fan duct on the heat sink fan. 106 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
10.
Holding
the
microprocessor
with
your
fingers,
position
the
microprocessor
so
that
the
triangle
±1²
is
aligned
with
the
corresponding
triangle
on
the
socket.
11.
Lower
the
microprocessor
straight
down
into
the
socket.
Note:
Install
the
black
protective
cover
that
was
removed
from
the
new
microprocessor
onto
the
defective
microprocessor
after
the
installation
is
complete.
12.
To
secure
the
microprocessor
in
the
socket,
close
the
microprocessor
retainer
and
lock
it
into
position
with
the
small
handle.
13.
Install
the
heat
sink
and
fan
assembly
on
the
system
board.
14.
Connect
the
heat
sink
and
fan
assembly
cable
to
the
system
board.
See
the
system
board
illustration
for
your
machine
type
at
“Locating
parts
on
the
system
board”
on
page
87.
15.
Position
the
fan
duct
on
the
heat
sink
fan.
106
Hardware
Maintenance
Manual