Lenovo ThinkStation C20 Hardware Maintenance Manual - ThinkStation C20/C20x - Page 52
Diagnostic error codes, can represent any number. - review
View all Lenovo ThinkStation C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See "Running tests" on page 34 for the specific type for information about the diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded FRU/Action No action 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Run the Setup Utility program. 2. Flash the system. See "Updating (flashing) the BIOS" on page 229. 3. System board 1. Reboot the system. 2. Flash the system. See "Updating (flashing) the BIOS" on page 229. 3. Run memory test 4. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. Adapter card 3. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board Information only Restart the test, if necessary 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 46 ThinkStation Hardware Maintenance Manual