Lenovo ThinkStation C20 Hardware Maintenance Manual - ThinkStation C20/C20x - Page 64
X-XXX 071-01X-XXX 071-02X-XXX
View all Lenovo ThinkStation C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXXAudio port error 1. Run the Setup Utility program. 2. Flash the system. See "Updating (flashing) the BIOS" on page 229. 3. System board 071-03X-XXX Audio port failure 1. Speakers 2. Microphone 3. Audio card, if installed. 4. System board 071-04X-XXX Audio port failure 1. Run the Setup Utility program. 2. Audio card, if installed. 3. System board 071-195-XXX Audio port Test aborted by user Information only Restart the test, if necessary. 071-196-XXX Audio port test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 071-197-XXX Audio port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 071-198-XXX Audio port test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Go to "Undetermined problems" on page 67. 071-199-XXX Audio port test failed, cause unknown 1. See "Undetermined problems" on page 67. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Replace component under function test. 071-25X-XXX Audio port failure 1. Speakers 2. Audio card, if installed 3. System board 080-000-XXX Game Port interface Test Passed No action 080-XXX-XXX Game Port interface Error 1. Remove the game port device and re-test the system. 080-195-XXX Game Port interface Test aborted by user Information only Restart the test, if necessary. 080-196-XXX Game Port interface test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 58 ThinkStation Hardware Maintenance Manual