Lenovo ThinkStation C20 Hardware Maintenance Manual - ThinkStation C20/C20x - Page 60
PCI Card Test Passed, PCI Card Failure
View all Lenovo ThinkStation C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Diagnostic Error Code 015-196-XXX USB port test halt, error threshold exceeded 015-197-XXX USB port test warning 015-198-XXX USB port test aborted 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX PCI Card Failure 018-195-XXX PCI Card Test aborted by user 018-196-XXX PCI Card test halt, error threshold exceeded 018-197-XXX PCI Card test warning 018-198-XXX PCI Card test aborted 018-199-XXX PCI Card test failed, cause unknown FRU/Action 1. Press F3 to review the log file. 2. Restart the test to reset the log file. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Go to "Undetermined problems" on page 67. 1. Go to "Undetermined problems" on page 67. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Replace component under function test. No action 1. Riser card, if installed. 2. System board 1. PCI card 2. Information only Restart the test, if necessary 1. Press F3 to review the log file 2. Restart the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement. 4. Replace the component under test. 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Go to "Undetermined problems" on page 67. 1. Go to "Undetermined problems" on page 67. 2. Flash the system and re-test. See "Updating (flashing) the BIOS" on page 229. 3. Replace component under function test. 54 ThinkStation Hardware Maintenance Manual