Lenovo ThinkStation C20 Hardware Maintenance Manual - ThinkStation C20/C20x - Page 53
Diagnostic Error Code, Run the Setup Utility program. - bios update
View all Lenovo ThinkStation C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Diagnostic Error Code 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure 001-025-XXX System Checksum Value error 001-026-XXX System FLASH data error 001-027-XXX System Configuration/Setup error 001-032-XXX System Device Controller failure 001-034-XXX System Device Buffer Allocation failure 001-035-XXX System Device Reset condition detected 001-036-XXX System Register error FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement 4. Replace the component under test. 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility program" on page 37. 2. Flash the system and retest. See "Updating (flashing) the BIOS" on page 229. 3. Go to "Undetermined problems" on page 67. 1. Go to "Undetermined problems" on page 67. 2. Flash the system and re-test. 3. Replace component under function test. 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board No action System board System board System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Flash the system. See "Updating (flashing) the BIOS" on page 229. 2. System board 1. Run the Setup Utility program. 2. Flash the system. See "Updating (flashing) the BIOS" on page 229. 3. System board System board 1. Reboot the system. 2. Flash the system. See "Updating (flashing) the BIOS" on page 229. 3. Run memory test. 4. System board System board System board Chapter 8. Symptom-to-FRU Index 47