Lexmark W850 User's Guide - Page 25
Installing optional trays, CAUTION-POTENTIAL INJURY, CAUTION-SHOCK HAZARD
View all Lexmark W850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Additional printer setup 25 Installing optional trays The printer supports the following optional input sources: • 2 Tray Module (two 500‑sheet trays) • 2,000‑sheet dual input trays • 2,000‑sheet high capacity feeder • Duplex unit CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION-SHOCK HAZARD: If you are installing an optional tray after setting up the printer, then turn the printer off and unplug the power cord, the USB cable, and the Ethernet cable before continuing. 1 Unpack the optional tray, and remove all packing material. 2 Place the tray in the location chosen for the printer. Note: If you are installing more than one optional tray, the 2,000‑sheet dual input trays must always be installed as the first optional trays (configuring from the bottom up). Note: The optional 500‑sheet trays and optional 2,000‑sheet dual input trays are interchangeable. 4 3 1 22 1 Tray 3 and Tray 4 (500-sheet trays or 2,000-sheet dual input trays) 2 Tray 1 and Tray 2 (500-sheet trays) 3 Tray 5 (2,000-sheet high capacity feeder) 4 Duplex unit Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.