Lexmark W850 User's Guide - Page 86

Understanding printer menus Menu item Units of Measure Inches Millimeters Portrait Width 3-17 inches 76-432 mm Portrait Height 3-17 inches 76-432 mm Feed Direction Short Edge Long Edge Bin Setup menu Menu Item Output Bin Standard Bin Bin 86 Description Identifies the units of measure Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Sets the portrait width Notes: • If the width exceeds the maximum, the printer uses the maximum width allowed. • 11.69 inches is the US factory default setting. Inches can be increased in 0.01‑inch increments. • 297 mm is the international factory default setting. Millimeters can be increased in 1‑mm increments. Sets the portrait height Notes: • If the height exceeds the maximum, the printer uses the maximum height allowed. • 17 inches is the US factory default setting. Inches can be increased in 0.01‑inch increments. • 432 mm is the international factory default setting. Millimeters can be increased in 1‑mm increments. Specifies the feed direction if the paper can be loaded in either direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray. Description Specifies the default output bin Note: Standard Bin is the factory default setting.