Lexmark X5070 User's Guide - Page 102
Wiping the print cartridge nozzles and contacts, Let the nozzles and contacts dry completely.
View all Lexmark X5070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6 Press . 7 Press again to confirm that plain paper is loaded. A page prints, forcing ink through the print cartridge nozzles to clean them. 8 Print the document again to verify that the print quality has improved. 9 If print quality has not improved, try cleaning the nozzles up to two more times. Wiping the print cartridge nozzles and contacts 1 Remove the print cartridges. 2 Dampen a clean, lint-free cloth with water, and place the cloth on a flat surface. 3 Gently hold the nozzles against the cloth for about three seconds, and then wipe in the direction shown. 4 Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and then wipe in the direction shown. 5 With another clean section of the cloth, repeat step 3 and step 4. 6 Let the nozzles and contacts dry completely. 7 Reinsert the print cartridges. 8 Print the document again. 9 If the print quality does not improve, clean the print nozzles. For more information, see "Cleaning the print cartridge nozzles" on page 101. 102