Lexmark X852E User's Reference - Page 32

Adjust analog receive fax options Option Description Fax Storage Determines whether or not the incoming faxes are stored if they cannot immediately be printed. The settings are ON or OFF. The default setting is ON. Fax Paper Size Defines the size of paper on which incoming faxes are to be printed (letter, legal and so on) if the requested size is not available. Fax Paper Type Defines the type of paper on which incoming faxes are to be printed (plain paper, card stock, and so on). If the requested type is not available, the printer prompts for the correct paper to be loaded. Output Bin Defines the output bin where incoming faxes are to be printed (standard bin, bin 1, or bin 2). Auto Reduction Sets the printer to fit incoming faxes to the available Fax Paper Size. The choices are YES and NO. Rings to Answer Lets you set the number of times the phone rings before the fax answers. The default for the fax modem port is to answer incoming calls on the first ring. Other choices range from 1 through 25. Distinctive Ring Feature Three options are available: • Enable Single Ring Pattern • Enable Double Ring Pattern • Enable Triple Ring Pattern All options are enabled by default. By changing these settings, you control which type of ring the MFP answers. Adjust analog fax log options Option Print Send Log Print Rcv Log Auto Print Logs Clear Logs Transmission Log Description Prints a list of faxes sent. Prints a list of received faxes. Automatically prints both fax logs when the log is full. The setting must be ON (default). When the setting is OFF, the log is maintained, but not automatically printed. Also, the oldest log entries are removed when the log becomes full. Removes all entries from the send and receive logs. Specifies that when you send a fax, a transmission log is printed to verify the fax was sent correctly. The settings are Always (default), Never, or Error Only. Adjust analog receive fax options 27