Lexmark XC4143 Users Guide PDF - Page 74
Device Operations, Toner patch sensor setup, App Configuration, Automatic Media Type Detection
View all Lexmark XC4143 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Understanding the printer menus 74 Menu item Description Device Operations Honor orientation on fast path copy Off* On Enable the printer to use the orientation setting under the Copy menu when sending quick copy jobs. Device Operations Automatic Media Type Detection Off On* Set the printer to detect the paper type of a page being loaded. Toner patch sensor setup Calibration frequency preference Disabled Fewest color adjustments Fewer color adjustments Normal* Better color accuracy Best color accuracy Set the printer to put down the correct amount of toner to maintain color consistency. Toner patch sensor setup Full calibration Run the full color calibration. Toner patch sensor setup Print TPS information page Print a diagnostic page that contains information on toner patch sensor calibration. App Configuration LES Applications Off On* App Configuration LES Applications Off On* Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Reset Maintenance Counter Reset the counter after replacing the ADF maintenance kit. Scanner Configuration Edge Erase Flatbed Edge Erase (3*) ADF Edge Erase (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Note: An asterisk (*) next to a value indicates the factory default setting.