Linksys WPS54G User Guide - Page 56
Open the PrintServer's Web-based Utility. Click, Reset, Status, Device, Upgrade - power adapter
UPC - 745883561049
View all Linksys WPS54G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Wireless-G PrintServer 7. To start over, I need to set the PrintServer to its factory default settings. Unplug the PrintServer's power adapter. Press the Reset button while you plug in the PrintServer's power adapter. Continue to hold the Reset button for 10 seconds and then release it. This will reset the password, wireless, and other settings on the PrintServer to the factory defaults. In other words, the PrintServer will revert to its original factory configuration. 8. I need to upgrade the firmware. In order to upgrade the firmware with the latest features, follow these steps: 1. Go to the Linksys website at http://www.linksys.com and download the latest firmware for the PrintServer. Then extract the firmware file on your PC. 2. Open the PrintServer's Web-based Utility. Click Status and then Device. 3. Click the Upgrade button, and follow the on-screen instructions. Appendix A: 50 Common Problems and Solutions