Motorola V3229 Operating Instructions - Page 103

CAountofigRuerattriaoinnCommands, Cont. %E 5 Asynchronous Operating Commands This option allows the modem to automatically retrain in response to poor received signal quality without redialing. The modem always responds to a retrain request from the remote modem. Auto Rate Renegotiation %R Table 29: Command Operation %E Disable auto retrain %E1 Enable auto retrain * *default If auto rate renegotiation is enabled, the modem automatically decreases DCE rate if signal quality deteriorates beyond the allowable bit error rate. If signal quality improves, the modem increases DCE speed. Table 30: Command %R %R1 %R2 %R3 Operation Disable auto rate renegotiation* Enable auto rate renegotiation using low BER: 1 in 105 Enable auto rate renegotiation using medium BER: 1 in 104 Enable auto rate renegotiation using high BER: 1 in 103 *default V.3229 / V.3229L -39