Motorola V3229 Operating Instructions - Page 187

7 V.25 bis Autodialer Example: SIC; Connect Incoming Call CIC No parameters are required. If there is an incoming call, the modem immediately answers the call. If no call is incoming, the command is ignored. Responses: VAL Valid command received. Transmitted on receiving an error-free command with no transmission error such as a parity error. This confirmation is sent before the command is executed. INVCU Invalid command - command unknown. Example: TIC INVMS Invalid command - message syntax error. Example: SIC; Redial Last Number CRR n -10 The CRR n command redials the last number a maximum of n times. If no parameters are present, the modem redials once. Also, the maximum number of redials, the amount of time between redials, and other parameters may vary depending on application and national requirements if outside the U. S. V.3229 / V.3229L