Motorola V3229 Operating Instructions - Page 16
<C#>, Introduction, Leased Line, Connection
View all Motorola V3229 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Refer to Strap Options. uction Installation Leased Line Connection Note: The modem is compatible with exclusion key phone arrangements. The modem operates on either 2-wire or 4-wire leased lines. The telephone company will install the leased line and wall jack at your site. The line connects to the modem at the 8-position TELSET/ LEASED LINE jack. The 42A block is the most common termination for leased line use. It requires the use of the 8-pin modular to spade lug cable (PN 61020569-0000). Figure 2-4 illustrates the typical hook-up of the modem for operation over private leased lines with dial backup. Note: Although the 42A block is the most common, some Bell operating companies have discontinued its use for leased lines. Instead, the modular jack JM8 is used. If this is the case in your area, you need a special cable (PN 61020575-0000). Contact your distributor for further information. V.3229 / V.3229L -9