Motorola V3229 Operating Instructions - Page 121

5 Asynchronous Operating Commands CONNECT message for the new DTE speed at the original rate. All subsequent data will be sent to the DTE at the new DCE speed. Table 48: Command Operation \J Disable slaved DTE/DCE (constant speed DTE on)* \J1 Enable slaved DTE/DCE (constant speed DTE off) V.42 Optional Detection Phase \M *default This is a data sequence that speeds up the LAPM link negotiation time if V.42 LAPM is supported by the remote modem. Operating Mode \N Table 49: Command Operation \M Disable V.42 fast detect phase \M1 Enable V.42 fast detect phase* *default Sets the error control mode that the modem uses while in data mode. An AT\Nn command issued during online command mode will not affect the current connection but will be acted on for subsequent connections. LAPM or MNP protocol operation is referred to as reliable mode, and the auto- V.3229 / V.3229L -57