Motorola V3229 Operating Instructions - Page 106
Line Current, Disconnect, Manual Dial, Backup, Disable AT, Command Set
View all Motorola V3229 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
5 Asynchronous Operating Commands Protocol Commands, Cont. Line Current Disconnect *LC Dial line operation only. The modem can be configured to disconnect upon loss or interruption of telephone line current. Manual Dial Backup *LD Disable AT Command Set *NT Table 34: Command *LC *LC1 *LC2 Operation Line current disconnect off Line current disconnect short (8 ms) Line current disconnect long (90 ms)* *default Leased line operation only. *LD dials the autodial number if the modem is in originate mode with manual dial backup selected. AT*NT disables the AT command set. AT*NT1 allows a modem to enable AT command operation of another modem via remote configuration. -42 V.3229 / V.3229L
<C#>-42
V.3229 / V.3229L
5
Asynchronous Operating Commands
Line Current
Disconnect
*LC
Dial line operation only. The modem can be config-
ured to disconnect upon loss or interruption of tele-
phone line current.
*default
Manual Dial
Backup
*LD
Leased line operation only. *LD dials the autodial
number if the modem is in originate mode with
manual dial backup selected.
Disable AT
Command Set
*NT
AT*NT disables the AT command set.
AT*NT1 allows a modem to enable AT command
operation of another modem via remote configura-
tion.
Table 34:
Command
Operation
*LC
Line current disconnect off
*LC1
Line current disconnect short (8 ms)
*LC2
Line current disconnect long (90 ms)*
Protocol Commands, Cont.