Motorola V3229 Operating Instructions - Page 125

5 Asynchronous Operating Commands Table 53: \Q Disable DTE flow control \Q1 Enable DTE XON/XOFF flow control* \Q2 Enable CTS flow control to the DTE \Q3 Enable bilateral CTS/RTS flow control \Q4 Disable DCE flow control \Q5 Enable DCE XON/XOFF flow control* \Q6 Enable CTS flow control to the DTE \Q7 Enable CTS flow control to the DTE XON/XOFF Pass Through \X *default This option is active when flow control of the modem by the DTE has been selected for XON/XOFF and the connect mode is reliable or normal. It enables or disables the sending of local flow control characters (XON/XOFF) to the remote modem as well as being acted on in the local modem. In reliable mode the modem treats incoming XON/XOFF characters from the remote modem as data characters. In normal mode the modem will look at the \G command and act accordingly. Caution: With \X1 in effect local flow control characters will be sent to the remote system. These characters may turn on the data flow from the remote system before the modem is ready to receive more data, possibly resulting in data loss. V.3229 / V.3229L -61