Motorola V3229 Operating Instructions - Page 241

Command Index and Defaults * factory default Command Page S-Reg Description \O 5-50 S60 Originate a reliable link \Q 5-44 S54 Disable DTE flow control \Q1 Enable DTE XON/XOFF flow control * \Q2 Enable CTS flow control to the DTE \Q3 Enables bilateral CTS/RTS flow control \Q4 Disable DCE flow control \Q5 Enable DCE XON/XOFF flow control * \Q6 Enable CTS flow control to the DTE \Q7 Enable CTS flow control to the DTE \R 5-18 S60 Ring indicate, blinks for ring and remains on for duration of call \R1 Ring indicate, blinks for ring and turns off when call is answered * \T 5-48 S58 Disable inactivity timer * \Tn Set inactivity timer to n (n=1-255 minutes) \U 5-51 S60 Accept an MNP link \V 5-43 S60 Disable protocol result codes * \V1 Enable protocol result codes \X 5-45 S54 No XON/XOFF characters to remote DCE * \X1 Pass XON/XOFF characters to remote DCE \Y 5-51 S60 Switch to MNP from normal mode \Z 5-51 S60 Switch to normal from MNP mode *AN *AN1 5-22 S34 Disables bilateral analog loop * Enables bilateral analog loop *AUn 5-15 Dial number stored at location n upon transition of DTR in command mode (n=1-9) autodial number -H V.3229 / V.3229L