Motorola V3229 Operating Instructions - Page 116

5 Asynchronous Operating Commands mote configuration mode. This code is separate from DTE security passwords, which are discussed under Security in the next section. The security code is user programmable and can be set to any value from a single 0 to any combination up to 99999999 using the AT%P= command. Example: If the remote modem security code is 12345, then the local modem must include this code in the initialization string before the remote modem responds. Table 45: Command Operation %P= Sets security code to a value 0 to 99999999 entered after the equal sign %P? Request local security code to be displayed %P=D Access for remote configuration is not possible when security code is disabled %P= *default The %P=D command disables remote configuration. To enable remote configuration, insert another security code. Entering Remote Configuration %T= This mode of operation allows the modem user to view or modify the option set of a compatible remote modem. Entering AT%T= (security code of remote) initiates remote configuration. The modem is shipped from the factory with security -52 V.3229 / V.3229L