Motorola V3229 Operating Instructions - Page 130
Inactivity Timer
View all Motorola V3229 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
5 Asynchronous Operating Commands A break is received from the remote modem while the modem is in connect state during a normal connection. Table 59: Command \K, \K1 \K2, \K3 \K4, \K5 Operation Empty the data buffers and send break to the serial port Immediately send break to the serial port Send a break to the serial port in sequence with any data received from remote modem A transmit break command is issued while the modem is in command state during a reliable or normal connection. Inactivity Timer \T Table 60: Command Operation \K, \K1 Empty the data buffers and send break to the remote modem \K2, \K3 Immediately send break to the remote modem \K4, \K5 Send a break to the remote modem in sequence with any data received from the serial port \T specifies the number of minutes the modem will stay online in a reliable mode without transmitting or receiving data before hanging up. When the value is set to 0, the timer is disabled. The timer is active only -66 V.3229 / V.3229L